Enable Logging for Cisco Meraki Devices

To enable logging for discovered Meraki devices, complete the following steps.

You need to have an account with Full privileges granted to enable logging.

1. Log in to the Cisco Meraki Dashboard.

2. Click Network-wide > General under Configure.

3. Scroll down the page to Logging and click the Add a syslog server.
   1. In the Server IP box, enter the IP address of the FMOS data collector.
   2. Use the default port of 514.
   3. For Roles, select Flows from the list.
   4. Click Save.
4. Log in to the Administration module.
5. On the toolbar, click Device > Devices and select the discovered Cisco Meraki device from the Device List page.
6. Open the Log Monitoring section.

7. Verify that the Enable Log Monitoring check box is selected.

8. Click Save.